DataM Intelligence, an international provider of market research and advisory services, has published its latest Global Coordinate Measuring Machine (CMM) Market analysis, indicating steady expansion of the industry. Market growth is being fueled by increasing demand for ultra-precise measurement, wider implementation of automation and Industry 4.0 frameworks, and tightening quality and regulatory requirements across manufacturing sectors. The report estimates that the market was valued at approximately US$ 3.94 billion in 2024 and is projected to grow to about US$ 8.34 billion by 2032, registering a compound annual growth rate (CAGR) of 9.96% during the 2025–2032 forecast period. This upward trajectory is driven by the expanding application of CMMs in industries such as automotive, aerospace and defense, electronics, medical devices, and heavy equipment manufacturing, as companies increasingly focus on dimensional precision, productivity enhancement, digital inspection processes, and advanced metrology capabilities in global production environments.
Growing Use of Portable and Non-Contact CMM Technologies
The rising adoption of portable and non-contact coordinate measuring machines is transforming industrial metrology by offering enhanced flexibility, faster inspection cycles, and high measurement reliability. These systems enable accurate inspection without direct physical contact, making them ideal for fragile, lightweight, or geometrically complex components where traditional contact probes may pose risks.
Portable CMM solutions support in-situ measurements directly on the production floor, helping manufacturers minimize downtime and streamline workflows. Meanwhile, non-contact CMMs that utilize laser scanning and optical measurement technologies are gaining traction for inspecting complex shapes and freeform surfaces. Their capability to rapidly capture dense 3D datasets improves inspection throughput while maintaining consistent accuracy. Sectors such as electronics, automotive, and medical device manufacturing are increasingly deploying these systems to comply with tighter tolerance and quality standards. Continuous technological innovation is further accelerating their market penetration.
For example, in June 2024, Keyence introduced a Portable Wide Area CMM capable of measuring large objects up to 25 meters using laser scanning with minimal setup requirements, reflecting growing demand for flexible, large-scale, non-contact inspection solutions. Similarly, FARO Technologies launched the Quantum X FaroArm Series in October 2024, highlighting the industry’s emphasis on improving manufacturing efficiency through advanced portable metrology platforms.
Increasing Quality and Performance Requirements in the Automotive Sector
The automotive industry’s growing emphasis on quality, safety, and performance is a major contributor to CMM market expansion. Modern vehicles comprise thousands of precision-engineered components, where even minimal dimensional deviations can affect reliability, safety, and fuel efficiency. The rapid shift toward electric vehicles has further intensified inspection demands due to the complexity of battery enclosures, electric motors, and lightweight structural designs.
Automotive manufacturers are under constant pressure to lower defect rates, reduce recalls, and minimize warranty expenses, making accurate dimensional verification critical. CMMs provide precise measurement of tight tolerances across engines, transmissions, chassis components, and body-in-white assemblies. Increasing production volumes and shared vehicle platforms also require faster, repeatable, and automated inspection solutions.
Deploying inline and shop-floor CMMs helps reduce scrap, rework, and production inefficiencies. Additionally, stringent vehicle safety and emissions regulations are compelling manufacturers to adopt more rigorous quality validation processes. The growing use of lightweight materials such as aluminum alloys and composites further reinforces the need for precise measurement to ensure structural strength. Together, these factors are driving sustained CMM adoption throughout the global automotive manufacturing ecosystem.
Portable CMMs Fuel Market Expansion Through On-Site Accuracy and Flexibility
Portable CMMs represent one of the fastest-growing segments within the overall CMM market, supported by demand for mobile, high-accuracy, and in-process inspection solutions. Systems such as articulated arms, laser trackers, and handheld CMMs allow manufacturers to perform precise measurements directly on the shop floor. Their portability removes the need to transport large or heavy components to fixed metrology labs, significantly reducing inspection delays.
Industries including automotive, aerospace, electronics, and heavy machinery increasingly depend on portable CMMs for rapid quality verification during production. In automotive manufacturing, these systems are commonly used to inspect body panels, powertrain parts, and complete vehicle assemblies. The increasing complexity of electric and autonomous vehicles has heightened the need for real-time and inline dimensional inspection. Portable CMMs support shorter production cycles while maintaining strict tolerance control, with ongoing technological advancements further boosting adoption.
For instance, FARO Technologies introduced the Quantum X FaroArm Series in October 2024, delivering up to 15% higher accuracy compared to previous generations. Such product innovations improve manufacturing efficiency and strengthen the role of portable CMMs as a key driver of market growth.
North America Strengthens Market Demand Through Advanced Manufacturing Leadership
North America remains a major contributor to the global Coordinate Measuring Machine market, supported by its strong presence of advanced manufacturing industries. The region hosts a high concentration of automotive, aerospace and defense, and medical device manufacturers that require precise dimensional control and robust quality assurance systems. Early implementation of Industry 4.0, automation, and smart manufacturing technologies continues to accelerate demand for sophisticated metrology solutions.
Manufacturers across North America are increasingly adopting automated and inline CMM systems to minimize defects, reduce rework, and limit production interruptions. Rising investments in electric vehicle manufacturing and aerospace programs further support demand for high-precision inspection technologies. The region also benefits from the presence of leading CMM suppliers and technology innovators, enabling rapid adoption of new products and system upgrades. Strict regulatory and quality compliance standards reinforce the need for reliable and repeatable measurement solutions, positioning North America as a key revenue and innovation hub for the CMM market.
Competitive Environment and Strategic Initiatives
The global CMM market is highly competitive, with major metrology and industrial automation companies such as Hexagon AB, Zeiss Group, FARO Technologies, Siemens, Renishaw plc, LK Metrology, and Mitutoyo Corporation actively competing. These companies differentiate themselves through broad product portfolios, high measurement accuracy, and advanced software-driven metrology solutions designed for applications in automotive, aerospace, electronics, and medical device manufacturing.
Core competitive strategies include continuous innovation in multisensor and non-contact CMM technologies, deeper integration of automation and digital inspection workflows, and expansion of portable and shop-floor measurement systems. Vendors are also investing heavily in software platforms that support data analytics, connectivity, and Industry 4.0 readiness. The ability to customize and scale CMM solutions for diverse manufacturing environments further enhances market positioning.
Key Developments
In 2025, Hexagon AB introduced MAESTRO, a next-generation coordinate measuring machine designed to redefine quality inspection through high-speed, connected measurement processes. The system addresses increasing productivity demands, workforce skill gaps, and stricter quality requirements by focusing on speed, usability, and digital integration.
In the same year, LK Metrology launched two new bridge-type CMM ranges, MAXIMA and MAXIMA R, developed to meet growing demand for accurate measurement of large and complex components. These systems offer long-term stability, consistent accuracy, and reliable performance, making them suitable for applications across aerospace, automotive, energy, heavy engineering, and industrial machinery sectors.
Company Profile Highlight: LK Metrology (UK)
LK Metrology is a globally established provider of precision measurement solutions, widely recognized for its coordinate measuring machines. Over time, the company has expanded beyond conventional CMM offerings to include advanced laser scanning and sensor technologies. Serving a broad range of industries, LK Metrology delivers high-accuracy, dependable, and application-specific inspection systems, positioning itself as a trusted partner in industrial quality control worldwide.
In 2025, LK Metrology expanded into industrial computed tomography through the acquisition of Germany-based ProCon X-Ray GmbH. This strategic acquisition extends the company’s inspection capabilities to include industrial CT imaging, strengthening its portfolio in non-destructive testing and advanced precision inspection technologies.
Market Outlook
According to DataM Intelligence, the global CMM market is expected to increasingly transition toward automated, software-centric, and digitally connected metrology solutions across automotive, aerospace, electronics, medical devices, and industrial manufacturing applications. The growing focus on precision engineering, zero-defect production, and tighter tolerance management is reinforcing the importance of CMMs in modern quality inspection workflows.
Rising adoption in both mature and emerging markets is supported by expanding manufacturing capacity, higher automation investments, and increasing product complexity. Continued innovation in multisensor, non-contact, and portable CMM technologies is improving measurement speed, accuracy, and operational adaptability. Manufacturers are prioritizing shop-floor integration, real-time analytics, and Industry 4.0 compatibility to enhance productivity and decision-making. At the same time, stricter regulatory and quality standards are driving greater reliance on advanced metrology systems, supporting sustained growth of the global CMM market through 2032.